How to Add Image to Cadsoft Eagle Schematic

January 14, 2012 at 2:06 pm | Posted in Eagle PCB, idea, Tutorial | 2 Comments
Tags: , ,

Few days ago, I wanted to put a logo to EAGLE schematic.

There are couple of ways to add image to EAGLE PCB.  You could use Bitmap to Eagle converter tool or you could use the import_bmp.ulp.
But, there is limited online tutorial or tips on how to import image to schematic.
I experimented the import_bmp.ulp a little bit, and I’d like to share my technique.

In this video, I show how to import a Creative Commons license logo as a device in a Eagle library which can then be added into schematics as a part. Now, you can add any image to schematics. Personal artwork, company logo, license, or even your photo.

Advertisements

Soldering is Easy – Menyolder Itu Gampang (Indonesian Translation)

April 21, 2011 at 8:19 pm | Posted in Tutorial | 5 Comments
Tags: , ,

I cannot remember exactly when  I started to learn soldering.
But since, I now know how to solder SMDs.  I can handle 0402 very easily.

If you are a complete beginner and never done soldering before, this is a great comic and illustrated teaching instruction on how to solder that you should check out.
Soldering is Easy by Mitch Altman, Andie Nordgren and Jeff Keyzer.

Until today, this comic has been translated into Russian, Chinese and Portuguese.
I was born in Indonesia. So, I decided to translate this great comic into Bahasa Indonesian making it more accessible to wider community!

You may download the PDF version below:
Menyolder Itu Gampang

Ya adik-adik semua, selamat mencoba menyolder ria!

Menyolder Itu Gampang - Page 1

Create a free website or blog at WordPress.com.
Entries and comments feeds.